pin|shaft|rotor|spindle in china

pin | shaft| spindle| rotor

design and make according to customers' requests for the pin, shaft , spindle ,rotor. Our products are widely used in many industries , especially the computer, plastic, telecommunication, electronic, automobile, machinery and so on. Our processing range of products cover external diameter 2mm—20mm with tolerance to ±0.01mm, length of 0.5mm—150mm with tolerance to ±0.02mm.
the products been made in the automatic lathe with prompt production efficiency and strict control.
available material : pin|shaft|spindle|rotor with 12L14 free cutting carbon steel
pin|shaft|spindle|rotor with SUS303 stainless steel
other material according to customer's design

	typical rotor applied to the sunxing DVD this spindle were made of 11L44 medium carbon steel , the hardness can be HRC44 ~ 48, and the plated nickel on suface. feature: cylinder been grinded, roughness can be 0.2Чm. one end mill fimish to double flats avail to screw. provide all kinds of Shaft Roll Pin as customer's requirement
	simple pin easy to machining this pin in automatic lathe, we are proficient in this way. feature: one end is camber ,the other eng turned. material: SUS303 stainless steel
	stainless steel especially pin. this easy pins made of stainless steel in automatic lathe. the flat of on end be mill fimish after automatic lather cut down.
	this is typical spindly pin applied to the toy racing car. the cylinder been mill fimish. both end with a chamfer for fit lock washer or tapping thread on one end and turn double chamfers on other end of the pin. material : SUS303 or carbon steel ,or reference to customer's requires
	the shaft is long and thin pin made of brass and applied to a part of lamp in automobile the surface plated nickel. we can manufacture full range of pin ,shaft, spindle ,rotor, axis as customer design.

Products List

QQ Contact: