We can manufacture the turning parts with material by brass and aluminum. we are proficient in turned this material and our automatic lathe be good at machining the parts. the maxima diameter of parts we can machining is under (or equal to) 20MM (1/4 inches), the total length normally not exceeding 60MM(2.5 inches) . all of material we use must be Rohs pass. and the plate of parts must be environment.
 |
sundry precision cutting or turning parts material: brass C3604 or other typical copper our company be proficient to cutting all kinds of precision parts appliance plenty lines .the parts of electron ;brass nut ;antenna of mobile etc. (the best property of turning of the C3604 brass in all kinds of copper, the productive efficiency be faster. never used the offstandard or unqualified brass to manufacture .all of the material must according to ROHS standard) |
 |
this brass part applied in valve as a valve spindle for our customer Fresh who is the famous bland of valve line in Denmark Europe. the size is Ø14mm*36mm, material brass C3604 . feature: three is a angle between the two milling side that is 60 ° |
 |
multifarious brass parts adopted on the automatic lathe. we can made to order multifarious brass turning parts according to customer's demand. the fastest production cycle of job-lot manufacture just only for 3~5days. |
 |
brass bean. brass turned parts made to order from customer material: copper C3604 size: hex7.0mm, total length 12mm.two sidestep in the hole for through fluid |
 |
kinds of pipy parts and multifarious parts manufacture with brass. roughness of surface can be 0.6цm in automatic lathe. |
 |
turned parts by brass milling hexagon on the parts . one end tapping thread 10#-32,the other end turning incline. through hole in the parts. applied in equipment of diving. |
 |
simple and easy brass parts: brass precision parts with 0.8mm pitch knurling of reticulation pull knurling on the brass bars size: Ø12.5mm*6mm*5mm(excircle diameter*inside diameter*thickness) |
 |
pull straight knurling on the brass bar. two sidestep and through hole. applied in the motorcar door. size:Ø7(excircle diameter)*3(inside diameter)*4mm(thicess) |
 |
easy brass parts material : copper 3604 size:Ø9.5mm(excircle diameter)*60mm(lenth) ,the longest one as a sleeve applied the dust collector. |
 |
kinds of aluminum jobs and aluminum turned parts material: T6 6061 6062 (hardness aluminum) 7075(free cutting hardness aluminum) 5056(ordinary aluminum) 2021( this mechanical property is lower than above three material, we don't adopt this kind material normally except the required of customer) the blue parts on the left picture is pass by negode and oxidation. |
 |
the precision aluminum turned parts: the parts on the left picture is a special aluminum screw, the hex size is 10mm,the total length is 56mm,threath size:M6X10mm and through hole inside the parts. feature: the excircle diameter for unroll M6 thread less-than the end excircle diameter that we must make a special tapping thread tool. |
 |
precision turned parts material: aluminum 6063-T6 feature: the roughness of surface 0.6чm |
 |
aluminum turned parts the one-off machining precision can be 0.005mm.proficient to machining cone, beveled and globe. we are good at machining many kinds of complicated parts with aluminum. surface: undressed negode to sundry colors oxidation oxidation to black |
QQ Contact: